dynatrap insect trap

What is a Dynatrap Insect Trap?

When you’re relaxing on your front porch or enjoying a quiet evening on the couch, the last thing you want is for mosquitoes to ruin the moment. If you’re tired of swatting and you’re sick of citronella, it may be time to take your insect elimination game up a notch with the Dynatrap Insect Trap.

The Dynatrap insect trap is a surefire way to turn your mosquito problem into a non-issue. Dynatrap mosquito traps utilize CO2 technology to attract mosquitoes to the trap (and away from you) where they are safely and discreetly captured. It couldn’t be simpler.

Below, we’ll take a closer look at the Dynatrap insect trap to determine exactly how it works, whether it’s effective, and how to use it.

What is a Dynatrap Insect Trap?

Summer is mosquito season but going indoors doesn’t guarantee protection. Mosquitoes have a way of sneaking into the places they are least wanted, so it’s worth investing in an effective insect trap that works safely indoors and out.

Enter: the Dynatrap insect trap.

The Dynatrap insect trap effectively attracts and traps flying insects, eliminating them from your home and property. With whisper-quiet operation, this trap emits carbon dioxide to mimic human breath. When flying insects approach the trap, they are sucked in and collected in a catch basket. There, the insects dehydrate and die within 24 hours, following which you simply twist off the basket to empty it.

This device utilizes the process of photo-catalysis through a combination of UV lamps and a unique Ti02 coating. The combination generates carbon dioxide which, combined with the UV light, attracts flying insects. A fan works to pull the insects into the trap where they eventually die.

Does the Dynatrap Insect Trap Work?

The Dynatrap is a simple mosquito killer, and can even be effective against other insects like moths and wasps. In fact, you may even be able to stop wearing bug spray while using the device.

That said, you may run into a few issues with it: Namely that it makes a bit of noise, so it might not be ideal for indoor use. It also may work less as a personal protection device than a mosquito population reduction device.

As an alternative to the Dynatrap insect trap, there are two other models to consider:

DynaZap

The DynaZap insect control device plugs into any outlet and immediately gets to work. This model utilizes UV light and warmth to attract insects then eliminates them as soon as they make contact with the electric grid. Ideal for outdoor use, this Dynatrap bug zapper can be hung on your porch or patio.

DynaShield

For versatile inside and outside protection against insects, try the DynaShield. This battery-powered device repels mosquitos and other insects using a natural blend of essential oils like spearmint, rosemary, and lemongrass. You simply place the device on a stable surface nearby and replace the refill pad after six hours of continuous use.

How to Clean a Dynatrap Insect Trap

Operating the Dynatrap mosquito trap is incredibly simple. You just place the trap about 20 to 40 feet away from where you’re sitting, hanging it or mounting it on a stationary surface three to six feet above the ground. Make sure it’s nowhere near a competing light source then plug it into a standard 120V outlet.

From there, simply twist the unit or press the switch to the On position. Once assembled and turned on, the Dynatrap can run continuously, rain or shine, until it needs servicing or cleaning.

The Dynatrap insect trap comes in a variety of different models, but cleaning is similar across the board. Dynatrap recommends frequent cleaning to prolong the lift of the unit and to ensure more efficient operation. It’s also a great opportunity to see how well the unit is working.

Here’s how to clean the Dynatrap:

  1.       Switch the unit off and completely unplug it.
  2.       Remove the screw keeping the retaining cage in place and twist the cage clockwise to remove it.
  3.       Clear away any buildup from inside the retaining cage using the included fan brush.
  4.       To replace the bulb (recommended annually after peak season), press and separate the middle body.
  5.       Carefully pull the bulb out of the socket and replace it with a new one.
  6.       Reattach the middle body to the upper body then screw the retaining cage into place.
  7.       Replace the screw to hold the retaining cage in place and resume use.

The Dynatrap is designed to run continuously, but if you encounter an issue, you can find troubleshooting instructions in the owner’s manual. It shows you exactly what to do if the bulb doesn’t illuminate or the fan doesn’t spin.

Where to Buy a Dynatrap Insect Trap

Dynatrap is a well-known and highly respected name in the insect extermination game, so you can find their products available from a wide variety of outlets. Perhaps the easiest place to find Dynatrap products is through the Dynatrap website or on Amazon.com.

If you prefer to shop in stores, you can find Dynatrap products at Best Buy, Ace Hardware, Bed Bath and Beyond, and various home improvement stores like Home Depot and Lowe’s.

If you’re sick of swatting and other insect extermination methods just aren’t working, it might be time to try a Dynatrap insect trap. This pest defense system quickly and effectively gets rid of mosquitoes, both indoors and out. As an alternative indoor insect trap, consider the Katchy UV Light Bug Trap